The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe.
The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while allowing Chevron to negotiate a resumption of operations in Venezuela, according to people familiar with the matter. Venezuela's OPPOSITION, which is backed by the United States, is understood to favor the move. Tight global oil supplies have sent crude and fuel costs soaring, threatening to add to already high inflation. Increasing Venezuelan crude exports would help ease supply constraints while also helping to reduce Europe's dependence on Russian energy.
The US has sought to encourage talks between the Venezuelan government and the US-backed opposition to open the way to free and fair elections by extending a limited license held by Chevron to allow the oil company to maintain its operations in Venezuela and negotiate future operations.
The United States reportedly did not extend a permit to Allow Chevron to drill and sell Venezuelan crude, as the company had hoped.
The license extension will allow Chevron to negotiate with State-run Petroleos de Venezuela SA, with which it has a joint venture. Previously, the company could not directly negotiate with any officials sanctioned by the United States. Chevron has been lobbying the United States to allow it to drill for Venezuelan crude and sell it on world markets to help lower energy prices amid the Russia-Ukraine war.
Affected by the ever-changing international situation, the supply and prices of many commodities like the concrete foaming agent are still very uncertain.
Foam concrete contains a large number of closed pores, the air in the pores is a good adiabatic medium, which can cut off the heat exchange. The lower the density, the more pores, the better the adiabatic property. Especially when the density is less than 500 μ m? The thermal conductivity of foamed concrete is less than 0.09w/m.k. Generally speaking, the material with thermal conductivity lower than 0.23 is called thermal insulation material, and the thermal insulation material lower than 0.14w/m.k is called thermal insulation material. Most of the foamed concrete is lower than 0.14w/m.k, and most of them are lower than 0.09w/m.k, so it is a good thermal insulation material.
1. Used for thermal insulation in buildings
Building thermal insulation if all the application of foam concrete, including roof thermal insulation layer, wall insulation layer, floor heating insulation layer (or cushion), is equivalent to using foam concrete to wrap the whole house, one square meter building area needs 0.2m3~0.5m3 foam concrete (roof, floor, four walls are calculated by 5cm insulation layer), a building with a building area of 10,000 square meters, you need foam concrete 2000m3~5000m3.
2. Used for building thermal insulation block
Non-load-bearing thermal insulation block: density 300kg/m3, thermal conductivity 0.05~0.08W/ m k, compressive strength 0.5MPa. The thermal insulation effect of this kind of block is the most ideal, and it is the product with the largest demand for building energy saving and the most lacking in the market. Ultra-light block is the development direction of foam concrete, it can achieve integrated thermal insulation, the wall itself can meet the requirements of 65% energy saving, save the external thermal insulation treatment, and reduce the building thermal insulation cost by 40%, 50%.
Load-bearing thermal insulation block: density 1000~1200kg/m3, compressive strength greater than 10MPa, thermal conductivity 0.18-0.22; it is lighter than red brick, but the thermal insulation is twice as high. This kind of block can completely replace red brick for load-bearing wall, it and thermal insulation, load-bearing, lightweight three functions in one, to replace red brick has great advantages, has a larger market.
3. Used for cold storage heat preservation
Foam was originally used in cold storage thermal insulation, but foam concrete pouring or masonry insulation was used in developed countries because it is easy to aging, shrinking and flammable. It mainly adopts integral cast-in-place, roof, wall, ground all foam concrete cast-in-place, no cold bridge, no gap.
4. Used for thermal insulation of industrial furnace
The main products are fire-resistant and thermal insulation bricks.
Large industrial furnaces such as iron and steel plants, glass plants, ceramic plants, non-ferrous metal smelters and cement calcination kilns need to build a layer of thermal insulation refractory brick on the outside of refractory bricks in order to reduce energy consumption. The original use of floating bead brick, alumina foam brick, the price is very high, now foam concrete refractory brick has replaced the high-priced traditional products, the price is less than half, very competitive.
Concrete Additives Supplier
TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.
If you are looking for high-quality CLC foaming agents, please feel free to contact us and send an inquiry. (firstname.lastname@example.org)
We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.
Due to the impact of COVID-19, russia-Ukraine conflict and international trade friction, the global economy is facing great challenges. Overseas trade is shrinking, supply chains are not smooth, oil prices are rising, freight rates are rising, and global trade and economic recovery are becoming more uncertain, which brings many risks and challenges to the company's business. The price of the concrete foaming agent can also be influenced by the above factors. To get the price of the latest concrete foaming agent, you are welcome to send email contact.
Recently, the International Energy Agency (IEA) released a report showing that global demand for naphtha has fallen sharply. Two factors account for this, the IEA said. On the one hand, profits are being squeezed by rising crude oil prices and shrink…
Greek Environment and Energy Minister Skrekas announced on July 25 that the Greek government will intervene strongly in electricity prices in August to help all Greek households and businesses out of the financial pressure caused by high electricity…
Libya's oil production has risen to more than 1m b/d, official data showed on Monday, a milestone for the North African country, up from 800,000 b/d just last week. Libya's oil production ros…