Answers

  • 0
  • 0

Influences of Concrete Water Reducer on Different Kinds of Cement (3)

U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the concrete water reducer will also increase.

The water-reducing agent or concrete water reducer is a kind of concrete admixture that can reduce the water consumption under the condition of keeping the slump of concrete basically unchanged. It has a dispersive effect on cement particles, can improve its workability, reduce water consumption per unit, improve the fluidity of concrete mixture, or reduce the amount of cement per unit, saving cement.

 

Because different cement has different mineralized compositions, in addition to the variety of mixed materials, the effect of admixtures for different types of cement is very different.

In this article, we will talk about the problems when water reducer meets different kinds of cement and solutions.

 

5. Gypsum Cement with Poor Water-soluble Effect

Gypsum is used as the coagulant of cement, and its dosage basically matches the content of C3A in cement. After adding water, gypsum forms a certain amount of ettringite in cement, which is adsorbed in C3A to control the hydration of C3A and play a role in regulating the setting time of cement. Among commonly used gypsums, the two-water gypsum (CaSO4.H2O) has the best water solubility, so two-water gypsum is more used to produce cement. But gypsum in cement production and cement clinker grinding, grinding temperature is too high will make a large amount of dihydrous gypsum into semi-hydrous gypsum (CasO4.1/2H2O) or anhydrous gypsum (CaSO4) that is anhydrous gypsum.  Also, some cement plants also can use anhydrous gesso directly or use a few industrial waste gesso to wait like fluorine gesso, desulphurization gesso, and phosphor gesso.  Anhydrite and the above waste gypsum are poor in water solubility and dissolve slowly in water. Wood calcium or sugar calcium and other retarding water reducing agents with high-cost performance are usually added to the admixture, and the incorporation of these water-reducing agents will affect the solubility of gypsum. Because gypsum does not dissolve quickly, C3A in the cement will hydrate rapidly, resulting in a large number of calcium aluminate crystals, resulting in the concrete pseudo-setting (that is, a small amount of cement has been set and a large number of cement particles have not been hydrated and set, and the cement slurry loses fluidity). 

In order to prevent cement mixed with anhydrite or cement mixed with other poor water-soluble gypsums to produce false coagulation, it is best not to use wood calcium, wood sodium, sugar calcium, and other water-reducing agent affecting gypsum dissolution.  The experiment proves that the control of the dosage of the water reducing agent has a certain effect. False coagulation can also be controlled by mixing a large number of admixtures which can supplement SO3 in cement.

 

6. Fresh Cement and Cement with a Large Specific Surface Area 

Storage time and specific surface area of cement kiln also affect the adaptability of admixtures. Usually, the cement with a short storage time after being made is called "fresh cement". Because the storage time of this cement is short, the cement temperature is higher, the cement hydration speed is very fast, and cement generates an electric charge during grinding, the mutual adsorption between particles affected the water reducing agent dispersion effect, increasing the concrete collapse loss rate. 

Prolonging the cement storage time and waiting for the temperature to drop below 50 will improve the solubility of the cement and the admixture. If the cement storage time cannot be extended, the dosage of retarder should be increased.

The specific surface area of cement has a certain influence on the adaptability of admixture.  Cement with a large specific surface area needs a large amount of water. In order to achieve a certain fluidity, more additives need to be added. It is generally considered that the specific surface area of cement is more suitable for about 5000CM2/g. The strength of cement with a large specific surface area develops quickly in the early stage, but it has a negative effect on the strength and slump resistance of concrete in the later stage. When cement with a large specific surface area is used, the dosage of admixture should be increased. Considering that the use cost is not increased, the dosage of water-reducing agents with a low price can be used and the dosage of water-reducing agents and retarders can be appropriately increased

 

Summary

Due to the complex mineralized composition and morphology of cement clinker and mixture, there are too many factors affecting the solubility of water-reducing agents. It is difficult to solve the adaptability of all water-reducing agents to cement by a simple method.  The results show that although polycarboxylate superplasticizer has better adaptability to cement than other kinds of superplasticizer, it still has some adaptability problems. The commonly used measures of changing the time and method of adding water reducing agent at home and abroad can improve the adaptability to some extent, but some problems will still occur when used in some special cement phase dissolution. 

 

Suppliers of Concrete Additives

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Recently, the first press conference of the Boao Forum For Asia Annual Conference 2022 was held. Two flagship reports were released at the conference: "Asia's Economic Prospects and Integration Process 2022" and "Sustainable Asia and the World 2022-Green Transformation in Action in Asia".

The flagship report points out that the global economy will recover in 2021, and the pace of economic integration in the Asia-Pacific has not stopped even in the face of the impact of COVID-19. The Asia-Pacific region has provided new impetus for the world's economic recovery and institutional building.  

The report gives an outlook on the Asian economy, noting that a number of factors will affect Asian economic growth. For example, mutated strains such as Delta and Omicron have become more transmissible, and many economies are experiencing epidemic peaks again. The Ukraine crisis has triggered geopolitical changes in Asia and Europe, leading to higher commodity prices, which may affect the global energy supply and energy transformation.

The report pointed out that the Asian economy will still be in the process of recovery in 2022, but the growth rate may moderate. According to the report, Asia's economic growth in 2022 is likely to be lower than the current IMF forecast, which is projected at 4.8%.

Affected by several factors, the supply of the concrete water reducer is erratic and thus its prices are expected to go higher in the future.

Inquiry us

Our Latest Answers

What is Strontium hydroxide?

The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe. The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while all…

Is boron amorphous or crystalline?

Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…

What does copper oxide do?

What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…